Installation Manual

21
Lutron integration protocol
Example DETAILS String
Operation Command String
Query: ?DETAILS,ID
GetdetailsofthedevicewithserialIDnumber00AC123D ?DETAILS,00AC123D<CR><LF>
Response: ~DETAILS,SerialNumber,Name,Family,Model,SoftwareRev ,BootSoftwareRev
ThedevicewithserialIDnumber00AC123Dhasthe
followinginformation:
Name=GRAFIKEye1
ProductFamily=GRAFIKEye
ProductModel=QSG
SoftwareRevision=1 70
BootCodeSoftwareRevision=2
~DETAILS,SN:00AC123D,IntegrationID:GRAFIKEye1,Famil
y:GRAFIK_Eye(2),Product:QSG(1),CODE:1.70,Boot:2.1,H
W:1.1<CR><LF>
DETAILS Command Formats
Operation
Command
?DETAILS,ID
1
QS Standalone (continued)
System Commands (continued)
DETAILSString
NOTE
1  DeviceIDmaybeenteredastheserialIDnumberortheIntegrationID UseALL_DEVICESorFFFFFFFFtoqueryall
devicesonthelink
Continuedonnextpage…