Installation Manual

22
Lutron integration protocol
RESET Command Formats
RESET Command-specific fields
 Action Numbers:
Action Action Number
Set(#)restartthedevice 0
Set(#)restoretofactorydefaults 1
Set(#)restoretofactorydefaults(doesnotaffectthe
IPaddress,Gatewayaddress,subnetmasksettings)
2
Example RESET Commands
Operation Command String
Execute: #RESET,ActionNumber
RestarttheNWK #RESET,0<CR><LF>
RestoreNWKtofactorydefaults #RESET,1<CR><LF>
Use “RESET Command-specific fields” tables
to complete these command fields.
Operation
Command
#RESET,ActionNumber
QS Standalone (continued)
System Commands (continued)
RESETCommands