Installation Manual

33
Lutron integration protocol
Setup
Wired
RF
Communication
Repeater Status
1
3
4
2
M
Main Repeater
Power
Repeater Link
COM
9 V
1
N / C
MUX
MUX
2
3
4
AddTest
Integrate Program / Integrate
RS232
Ethernet
USB
RadioRA 2 (continued)
System Commands (continued)
TIMECLOCKCommands
TIMECLOCK Command Formats
TIMECLOCK Command-specific fields
 Action NumbersandParameters:
Action Action Number Parameters
Set(#)CurrentTimeclock
Mode
1
1 ModeIndexNumber
Get(?)CurrentTimeclock
Mode
1
1 None
Get(?)SunriseTime 2 None
Get(?)SunsetTime 3 None
Get(?)Day’sSchedule 4 None
Set(#)ExecuteIndexed
Event
5 Indexoftheeventtotest Theindexnumberoftherstevent
is1;thesecondeventis2,andsoon
Set(#)IndexedEventas
EnabledorDisabled
6 EventIndex,EnableState(1=Enable,2=Disable)
NOTE
1  InordertosettheTimeclockMode,the“ModeIndex”mustbedeterminedusingthe(?)help,(#)timeclock,1command 
ModeIndexesareprojectdependentandmaychangewitheachnewproject
Example TIMECLOCK Messages
Operation Command String
Execute: #TIMECLOCK,IntegrationID,ActionNumber,Parameters
Executethe3rdeventofthetimeclock #TIMECLOCK,4,5,3<CR><LF>
Query:?TIMECLOCK,IntegrationID,ActionNumber
Whatisthesunrisetime? ?TIMECLOCK,4,2<CR><LF>
Response:~TIMECLOCK,IntegrationID,ActionNumber,Parameters
Thetimethesunrises  ~TIMECLOCK,4,2,05:32<CR><LF>
Use “TIMECLOCK Command-specific fields” tables
to complete these command fields.
Operation
Command
#TIMECLOCK,4,ActionNumber,Parameters
Integration ID (example)