Installation Manual

42
Lutron integration protocol
SHADEGRP Command Formats
SHADEGRP Command-specific fields
 Action NumbersandParameters:
Action Action Number Parameters
Set(#)ShadeGroupLevel 1 Level
1
=0–100or0 00 –100 00
Delay
2
in:SS ss
3
,SS,MM:SS,orHH:MM:SS
Set(#)StartRaising
4
2 None
Set(#)StartLowering
4
3 None
Set(#)StopRaisingor
Lowering
4 None
Set(#)orGet(?)Current
Preset
6 PresetNumber
5
= 0 – 3 0
NOTES
1  TheLevelisacceptedasapercentage,where100%isfullyopenand0%isfullyclosed
2  TheDelaytimeisoptional Whennotused,thesystemwilluseazero-seconddelay Theminimumdelaytimeis
0seconds Themaximumdelaytimeis4hours
3  Fractionalseconds“SS ss”willberoundeddowntothenearestquartersecond Forexample,ifadelaytimeisspecied
as1 45secondsavalueof1 25secondswillbeused
4  WhenaRaise/Lowercommandisissued,theshadegroup’slevelwillcontinuetogotowardsopen/closeuntilaStop
commandisreceived
5  Preset0istheOpenPresetandPreset30istheClosedPreset
Example SHADEGRP Messages
Operation Command String
Execute: #SHADEGRP,IntegrationID,ActionNumber,Parameters
Setshadegroupto70%(Delay=2sec) #SHADEGRP,2,1,70,2<CR><LF>
Lowershadegroup #SHADEGRP,2,3<CR><LF>
Query: ?SHADEGRP,IntegrationID,ActionNumber
Whatisthecurrentactivepreset? ?SHADEGRP,2,6<CR><LF>
Response: ~SHADEGRP,IntegrationID,ActionNumber,Parameters
ShadegroupPreset2iscurrentlyactive ~SHADEGRP,2,6,2<CR><LF>
Quantum (continued)
System Commands (continued)
SHADEGRPCommands
Use “SHADEGRP Command-specific fields” tables
to complete these command fields.
Operation
Command
Integration ID (example)
#SHADEGRP
1
,2,ActionNumber,Parameters
NOTE
1  SHADEGRPcanbeusedtocontrolonlythoseshadegroupsofaQuantumsystemthathavebeenassignedtoa
particularintegrationaccesspoint PleaserefertotheQ-Designsoftware(IntegrationTab)orQuantumIntegrationReport
fordetailsofwhatshadegroupsareavailableforcontrolandmonitoring