Installation Manual

44
Lutron integration protocol
Example OUTPUT Messages
Operation Command String
Execute: #OUTPUT,IntegrationID,ActionNumber,Parameters
Setoutputlevelto70%(Fade=4sec,Delay=2sec) #OUTPUT,2,1,70,4,2<CR><LF>
RaiseOutput #OUTPUT,2,2<CR><LF>
Query: ?OUTPUT,IntegrationID
Whatisthecurrentoutputlevel? ?OUTPUT,2<CR><LF>
Response: ~OUTPUT,IntegrationID,ActionNumber,Parameters
1
Outputlevelissetto48% ~OUTPUT,2,1,48<CR><LF>
 NOTE
1  TheFadeandDelaytimeareoptional Whennotused,thesystemwilluseaone-secondfadetimewithzero-second
delay Theminimumfadeanddelaytimeis0seconds Themaximumfadeanddelaytimeis4hours Forshadeoutputs,
theFadeparameterhasnoeffect(sinceshadeshavexedspeeds)butitisrequiredwhenspecifyinganoptionaldelay
Quantum (continued)
System Commands (continued)
OUTPUTCommands(continued)