Installation Manual

47
Lutron integration protocol
HomeWorks QS (continued)
System Overview (continued)
Command Types
Thefollowingisalistofsupportedcommandtypes Detailsoncertaindevice-specictypes(e g ,
DEVICE,HVAC)arelocatedintheindividualdevicesectionofthismanual
Operationcharacterswillbefollowedbycommandtypes 
• DEVICE allowscontrolandmonitoringofdeviceinputssuchasbuttonpressesandcontact
closureinputs
• OUTPUTallowscontrolandmonitoringofdeviceoutputssuchasdimmersandcontactclosure
outputs
• SHADEGRPallowscontrolofshadesintheHomeWorksQSsystem Shadegroupsarecollections
ofshadesthatoperateinunison
• MONITORINGspeciesthetypeofmessagesthatthesystemwillreport
• HVACallowscontrolandmonitoringofLutronHVACequipment
• TIMECLOCKallowscontrol(enable/disable)andmonitoringofsystemtimeclocks
• SYSVAR allowscontrolandmonitoringofsystemvariables
• AREAallowscontrolandmonitoringofanarea(e g ,activatingareaScenes,monitoring
occupancy)
• ERRORdisplaysresponsestoinvalidcommands
• HELPdisplaysusageinformationforthesupportedcommandsandtheircorrespondingactions
• SYSTEMallowssettingandcontrollingsystemparametersandvariables
• ETHERNETmodiestheEthernetcongurationoftheHomeWorksQSprocessor
• INTEGRATIONIDgetsinformationoftheintegrationidorserialnumberofadevice
• RESETresetstheHomeWorksQSprocessor