Installation Manual

54
Lutron integration protocol
HomeWorks QS (continued)
System Commands (continued)
TIMECLOCKCommands
TIMECLOCK Command Formats
TIMECLOCK Command-specific fields
 Action NumbersandParameters:
Action Action Number Parameters
Get(?)SunriseTime 2 None
Get(?)SunsetTime 3 None
Get(?)Day’sSchedule 4 None
Set(#)ExecuteIndexed
Event
5 Indexoftheeventtoexecute Theindexnumberoftherst
eventis1;thesecondeventis2,andsoon
Set(#)IndexedEventas
EnabledorDisabled
6 EventIndex,EnableState(1=Enable,2=Disable)
Example TIMECLOCK Messages
Operation Command String
Execute: #TIMECLOCK,IntegrationID,ActionNumber,Parameters
Executethe3rdeventofthetimeclock #TIMECLOCK,2,5,3<CR><LF>
Query:?TIMECLOCK,IntegrationID,ActionNumber
Whatisthesunrisetime? ?TIMECLOCK,2,2<CR><LF>
Response:~TIMECLOCK,IntegrationID,ActionNumber,Parameters
Thetimethesunrises ~TIMECLOCK,2,2,05:32<CR><LF>
Use “TIMECLOCK Command-specific fields” tables
to complete these command fields.
Operation
Command
#TIMECLOCK,2,ActionNumber,Parameters