Installation Manual

70
Lutron integration protocol
myRoom plus (continued)
System Commands (continued)
AREACommands
AREA Command Formats
AREA Command-specific fields
 Action NumbersandParameters:
Action Action Number Parameters
Get(?)OccupancyState
1
8 3=Occupied
4=Unoccupied
Use “AREA Command-specific fields” tables
to complete these command fields.
Operation
Command
Integration ID (example)
?AREA
1
,2,ActionNumber,Parameters
Assembled in U.S.A.
50015757 Rev. A
GCU-HOSP
Guestroom Control Unit
+ 44.(0)20.7680.4481
+ 1.800.523.9466
lutron.com
243C IND. CONT. EQ.
IEC PELV/NEC Class 2
®
NOTE
1  ThisisnotforGuestPresenceDetectionoftheroom
NOTE
1  AREAcommandscannotbesenttoareasthatcontainotherareas,suchasaroomthathasmultipleareaswithinit
(e g ,bedroom,bathroom)
Example AREA Messages
Operation Command String
Execute: #AREA,IntegrationID,ActionNumber,Parameters
Setarealevelto75%(Fade=4sec,Delay=2sec) #AREA,2,1,70,4,2<CR><LF>
LowerArea #AREA,2,3<CR><LF>
Query: ?AREA,IntegrationID,ActionNumber
Istheareaoccupied? ?AREA,2,8<CR><LF>
Whatisthecurrentactivescene? ?AREA,2,6<CR><LF>
Response: ~AREA,IntegrationID,ActionNumber,Parameters
Theareaiscurrentlyoccupied ~AREA,2,8,3<CR><LF>
AreaScene2iscurrentlyactive ~AREA,2,6,2<CR><LF>