Installation Manual

5
Lutronintegrationprotocol
DEVICE Command-specific fields
 Component Numbers:
RefertodevicespecictablesforlistsofComponentNumbers
Action Numbers and Parameters:
Action Action Number Parameters
Set(#)Enable
1
1 None
Set(#)Disable
1
2 None
Set(#)Press,Close,orOccupied 3 None
Set(#)Release,Open,orUnoccupied 4 None
Set(#)Hold
2
5 None
Set(#)Double-tap
2
6 None
Set(#)orGet(?)CurrentScene
1,2
7 Scene
Set(#)orGet(?)LEDState 9 0=Off
1=On
2=NormalFlash
2
3=RapidFlash
2
Set(#)orGet(?)LightLevel
3
14 0–100or0 00–100 00
SS ss,SS,MM:SS,orHH:MM:SS
SS ss,SS,MM:SS,orHH:MM:SS
NOTES
1  Quantum2 7andhigher
2  NotsupportedinRadioRA2
3  NotsupportedbyQuantum
DEVICE Command Formats
Use “DEVICE Command-specific fields” tables
to complete these command fields.
Operation
Command
Integration ID (example)
#DEVICE,5,ComponentNumber,ActionNumber,Parameters
Continuedonnextpage…
Integrator’s Reference (continued)
DEVICE: Command Summary
Deviceintegrationcommandsallowtheusertoaccesscomponentsofthesystemsuchasa
physicaldevice Theusercanactivateprogrammingviabuttonpresses,releases,etc ,aswellas
monitorthosesameeventsastheyoccurinthesystem