Cut Sheet

11
PART 3 – EXECUTION
3.01 I NSTALLATION
A. Contractor shall furnish all devices (dimmers, accessories, &
wallplate kits), labor and other services necessary for the proper
installation of the devices as indicated on the drawings and specified
herein.
B. Contractor shall be responsible for derating dimmer capacity if side
sections are removed.
C. Contractor shall run separate neutral wires in 120/208 VAC
installations.
D. Devices shall be installed utilizing manufacturer's recommended
application, wiring and installation instructions.
E. Contractor to provide seamless wallplate covers per specification
2.02 for all devices ganged in a common box. Contractor shall
provide barriers within the box where required by code.
3.02 F
IELD Q UALITY C ONTROL
A. Twenty-four hours a day, seven days a week, global customer
service and technical hotline available.
B. Supplemental information shall be provided by manufacturers
Internet site.
Lutron Electronics Co., Inc.
7200 Suter Road • Coopersburg, PA 18036 U.S.A.
Made and printed in U.S.A. 3/03 ©2003
Controls
™