Cut Sheet

2
Maximum
Description Capacity
1
Model #
HI-POWER 2•4•6
TM
DIMMING MODULES
To increase load capacity up to 30,000W/VA in most popular
sources, use one DVSC-600P- or DVSC-603P- and add up to
five dimming modules. Cannot be used with 0-10VDC ballast.
FAN-SPEED CONTROLS
Quiet Controls
For use with one ceiling paddle fan.
Preset Fan-Speed Controls
3
Single pole/ 3-way, 1.5A DVSCFSQ-F-
3-speed
Note: Does not have soft-glow nightlight. For 3-way and
4-way switching, use with Satin Colors switches (SC-3PS-
or SC-4PS-), or other mechanical switches.
SWITCHES
3
General Purpose Switching of all
Sources and Motor Loads
Single pole, 120/277V 15A SC-1PS-
3-way, 120/277V 15A SC-3PS-
4-way, 120/277V 15A SC-4PS-
ACCESSORIES
Receptacles
Receptacle
3
15A, 125V SCR-15-
GFCI Receptacle
3
15A, 125V SCR-15-GFCI-
Telephone and Cable Television Jacks
A physical barrier (partition) must exist when ganging with
line-voltage products
Single Telephone Jack
6-conductor, RJ11 SC-PJ-
Note: Also accepts most 4-conductor plugs.
Cable TV Jack
3
F- STYLE
75-Ohm, coaxial cable jack SC-CJ-
Have Questions? Call the Lutron Hotline [phone]
To order—Call Lutron Customer Service 610-282-3800
Maximum
Description Capacity
1
Model #
DIMMERS
Incandescent
Preset Dimmers with Nightlight
Single pole 600W DVSC-600P-
Single pole 1000W DVSC-10P-
3-way 600W DVSC-603P-
3-way 1000W DVSC-103P-
Note: The nightlight is visible best on the lighter colors. For
3-way and 4-way switching, use with Satin Colors switches
(SC-3PS- or SC-4PS-), or other mechanical switches.
Electronic Low Voltage
Preset Dimmers with Nightlight
Single pole 300W DVSCELV-300P-
3-way 300W DVSCELV-303P-
Note: Requires neutral wire connection. The nightlight is visible
best on the lighter colors. For 3-way and 4-way switching, use
with Satin Colors switches (SC-3PS- or SC-4PS-), or other
mechanical switches.
Magnetic Low Voltage
Preset Dimmers with Nightlight
Single pole 600VA (450W
2
) DVSCLV-600P-
Single pole 1000VA (800W
2
) DVSCLV-10P-
3-way 600VA (450W
2
) DVSCLV-603P-
3-way 1000VA (800W
2
) DVSCLV-103P-
Note: The nightlight is visible best on the lighter colors. For
3-way and 4-way switching, use with Satin Colors switches
(SC-3PS- or SC-4PS-), or other mechanical switches.
Fluorescent Dimming with Hi-lume® and
Eco-10TM (ECO-Series) Electronic Ballasts
Preset Dimmers with Nightlight
3
Single pole/ 3-way 8A DVSCF-103P-
Single pole/ 3-way, 277V 6A DVSCF-103P-277
Note: Use with Lutron Hi-lume or Eco-10 (ECO-Series) line
voltage control Electronic Dimming Ballasts only. Requires
neutral wire connection. The nightlight is visible best on the
lighter colors. For 3-way and 4-way switching, use with Satin
Colors switches (SC-3PS- or SC-4PS-), or other mechanical
switches.
Fluorescent Dimming with Tu-Wire®
Electronic Ballasts
Preset Dimmers with Nightlight
Single pole/ 3-way 5A DVSCFTU-5A3P-
Note: Use with Lutron Tu-Wire line voltage control electronic
dimming ballasts only. The nightlight is visible best on the
lighter colors. For 3-way and 4-way switching, use with Satin
Colors switches (SC-3PS- or SC-4PS-), or other mechanical
switches.
1 For capacities in multigang installations see derating pg. 3.
2 Actual lamp wattages.
3 No derating required if ganged.
Controls
™