Cut Sheet

FLOW Source EEE 802.3x pause frame for full-duplex

Back pressure for half-duplex

Switch Fabric 1.6 Gbps (non-blocking)

Safety

ESD (Ethernet) DC 6 kV

Surge (EFT for power) DC 4 kV

Reverse voltage protection Yes

Monitoring

Error output Relay, 1 NO contact - 1 A @ DC 24 V

Switching current 1 A @ DC 24 V

Switching voltage AC 120 V / DC 28 V

Isolation voltage DC 500 V

General

Rated voltage U

DC 12 – 48 V redundant, AC 24 V

Nominal voltage range 9 V – 52 V

Rated current 2.5 W, DC: max. 0.17 A, AC: max. 0.15 A

Degree of protection IP30

Relative humidity (operation) 5 % – 90 % (non-condensing)

Relative humidity (storage) 0 % – 90 % (non-condensing)

Housing material Metal

Mounting DIN rail mountable TS35

(EN 60715)

Wall mounting

Installation position Any

Connection type 6-pole pluggable screw terminal for power supply and fault diagnosis

single wire/fine wire

0.25 mm² – 2.5 mm²

AWG 20 – AWG 14

fine stranded wire with ferrule

0.25 mm² – 1.5 mm²

AWG 20 – AWG 16

MTBF >100000 h

Dimensions (w × h × d) 41.0 mm × 115.0 mm × 70.0 mm

Weight/unit 0.3 kg

PU (units) 1

General ambient conditions

Operation temperature range -40 °C . . . +75 °C

Storage temperature range -40 °C . . . +75 °C

Technical data sheet

Ethernet · Unmana g e d E-CO Switch, 8 - Po r t, 10/100 MBit/s

21.04.2022 – Subject to technical modifi ca ti o n

Part N o . 7720 0 6 • Datashe e t versio n : 01 page 2 of 3