Owners manual

INSTALLATION INSTRUCTIONS AND PARTS LIST
VEHICLE APPLICATION:
MODEL 250014 (14” X 23”) REAR MUDGUARDS WITH SST
MODEL 251014 (14” X 23”) REAR MUDGUARDS WITHOUT SST
UNIVERSAL APPLICATIONS FOR SINGLE WHEEL VEHICLES
1. READ INSTRUCTIONS COMPLETELY AND CHECK TO MAKE SURE THAT ALL REQUIRED PARTS
(LISTED ON SERVICE PARTS LIST) ARE ON HAND BEFORE STARTING THE INSTALLATION.
2. NOTE THAT THESE MUDGUARDS ARE A UNIVERSAL PRODUCT. SOME MODIFICATIONS TO THE
MUDGUARD, OR TWISTED BRACKET MAY BE REQUIRED TO MAKE YOUR SPECIFIC
APPLICATION.
3. INSTALL THE MUDGUARDS AS FOLLOWS:
3.1. ATTACH THE MOUNTING BRACKETS (ITEM #9) TO THE MUDGUARDS. USE 10-24 X 1” TRUSS
HEAD SCREWS (ITEM #6), #10 FLAT WASHERS (ITEM #8) AND 10-24 SERRATED FLANGE NUTS
(ITEM #7). (USE THE HOLE IN THE BRACKET THAT BEST LOCATES THE SPLASH GUARD IN
THE PREFERRED LOCATION). THE BRACKET MAY NEED TO BE BENT TO CLEAR THE SPRING
SHACKLE.
3.2. POSITION THE MUDGUARD AGAINST THE WHEEL WELL FLANGE. MOVE THE SPLASH
GUARD IN OR OUT AS DESIRED, LEVEL THE SPLASH GUARD, CLAMP THE MUDGUARD TO
THE WHEEL WELL FLANGE AND THE TOP OF THE MOUNTING BRACKET TO THE INNER
WHEEL WELL FLANGE.
3.3. FASTEN THE MUDGUARD TO THE WHEEL WELL FLANGE BY DRILLING THREE 3/16” DIA.
HOLES THRU THE MUDGUARD AND THE CENTER OF THE WHEEL WELL FLANGE. START THE
HOLES APPROX. 3/4” FROM THE TOP AND SPACE EQUALLY. FASTEN WITH 1/4" X 1" HEX
HEAD THREAD FORMING STAINLESS STEEL SCREWS (ITEM #5).
3.4. USING THE HOLE IN THE MOUNTING BRACKET AS A PILOT, DRILL A 3/16” DIA HOLE THRU
THE INNER BOX PINCH WELD AND FASTEN WITH A 1/4” X 1" HEX HEAD THREAD FORMING
SCREW (ITEM #5).
SERVICE PARTS LIST
ITEM PART NO. QTY DESCRIPTION
1 550094 1 MUDGUARD, RUBBER, 14X23, LH, W/O SST
2 550095 1 MUDGUARD, RUBBER, 14X23, RH, W/O SST
3 550096 1 MUDGUARD, RUBBER, 14X23, LH, WITH SST
4 550097 1 MUDGUARD, RUBBER, 14X23, RH, WITH SST
5 108449 8 SCREW-SELF TAPPING, 1/4" X 1", SST
6 105516 2 SCREW-TRUSS, HEAD, 10-24 X 1", SST
7 104261 2 NUT-SERRATED FLANGE, 10-24, SST
8 105511 4 WASHER-FLAT, .203 X .625 X .062,SST
9 544060 2 BRACKET-MOUNTING, TWISTED, SPLASHGUARDS
550099 SHEET 1 01APR13