Operation Manual

LUVION Premium Baby products

GRAND ELITE 2

Premium Babymonitor

3.6 TEMPERATURE SCALE DISPLAY SETTING

The temperature reading from the temperature sensor at the back of the Camera Unit

will be displayed on the top of the screen. To toggle between C and F:

1. Press and hold the SHORT-CUT button for more than 3 seconds.

2. Check that the temperature display reading on the screen has changed to your

desired scale. If not, repeat step 1.

4. USING THE LUVION GRAND ELITE 2 MONITOR

4.1 SET UP

4.2 PAN AND TILT

Place the Camera Unit in a convenient location (e.g. on a table or a shelf) and point the

camera lens toward the area you want to monitor.

 NOTE

Do not place the Monitor Unit within baby’s reach. If there is interference with the

picture or sound, try moving the units to di erent locations, and ensure they are not

close to other electrical equipment.

The Camera Unit can be remotely controlled from the Monitor Unit.

1. Press

UP button or DOWN button to tilt upward or downward.

2. Press the

LEFT button or RIGHT button to pan left or right.

4.3 NIGHT VISION MODE

The Camera Unit has 8 high-intensity infrared LEDs for picking up clear images in the

dark. When the built-in photo sensor detects a low level of ambient light, the LEDs

will automatically activate and the screen on the Monitor Unit will display in black and

white. The

icon will be displayed on the screen.