Operation Manual

10
1. Signal indicator
The signal indicator shows the strength
of the signal being recieved from the
baby unit. One or no bars indicates a
poor signal and 4 bars indicate a strong
signal.
Signal strength Indicator Warning
Perfect None
Good None
Fair None
Low Out Of Range
No Signal Out Of Range
2. Channel indicator
The channel indicator displays the current channel. Press the button to switch between the
available baby units. To automatically switch between the channels press the button.
When the baby unit is positioned too far from the parent
unit, the warning message Out of Range will appear on
the screen of the parent unit and the video will start to
icker. When there is no connection between the baby
and the parent unit, the screen of the parent unit will be
black and display the warning message Out of Range.
The baby unit volume can be adjusted by using the
buttons when viewing the video of the baby unit.
Press the button to decrease the volume, and press the
arrow to increase the volume. When the volume is set
to one bar (lowest setting) the volume is muted.
The volume indicator will be displayed when you change
the volume.
Cam1
Cam1
Out Of Range
Cam1
Volume indicator
Out Of Range warning
Adjust the volume