Operation Manual

16
BABY UNIT PAIRING
The system comes with a baby unit that has already
been paired with the parent unit. These units will
communicate with each other once they are switched
on.
The pairing function gives each baby unit a separate
channel on the parent unit (with a maximum of 4 baby
units) this is necessary for conguring additional baby
units.
Note:
It is highly recommended to pair the baby units to the
parent unit before permanently mounting them.
1. Switch the baby unit on.
2. Switch the parent unit on.
3. Press the MENU button on the parent unit. Navigate
to the Pairing menu using the buttons. Press the OK
button to enter the Pairing menu.
4. Select a channel using the buttons. Press OK to
accept the channel.
5. A message will be displayed on the parent unit screen.
The parent unit will count down from 30 to 0. You have
to briey press the Pair button on the baby unit within
this time to successfully pair it to the parent unit.
If the Pair button on the back of the baby unit is not
pressed within this time, the units will not be paired.
6. Press the pair button. It is located at the back of the
baby unit.
When the baby and parent unit have been paired, the
video from the baby unit will be directly displayed on
the screen of the parent unit.