Operation Manual

40
MENU > SETUP > PAIRING
You can use the pairing function to restore the
connection/or make a new connection between
the baby unit and parent unit. It also enables
you to connect additional baby units to the
parent unit. For more info see page 19.
> Move the joystick up or down to change the
camera channel you would like to pair.
> Press the joystick to con rm your selection.
> The parent unit will count down. Brie y press
the pair button on the baby unit during this
time.
NOTE: It is highly recommended to pair
the baby units to the parent unit before
permanently mounting them.
MENU > SETTINGS
You can change the settings in this menu.
> Move the joystick to the up/down/left/right
to select a submenu.
> Press the Joystick to con rm a selection and
to open a submenu.