Assembly Instructions
End Table Floor Lamp
Instructions
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE FIRST USE.
This lamp must be assembled before use.
Please take a moment to read these
instructions before attempting assembly.
Assembly Instructions
1. Lay out all parts on smooth surface
as shown in illustration.
2. Screw post (B) onto the base (A)
and tighten.
3. Slide main cable through post (C) and
attach post (C) onto post (B).
Fix in place using the Allen key and 2 grub
screws provided.
4. Attach the connector cable from post (D)
to post (C)
Screw post (D) onto post (C) and tighten.
5. Screw in max 25 Watt bulb into socket.
6. Screw shade (E) on to the lamp holder,
fixing in place by rotating in a counter
clockwise direction.
7. Plug into outlet and turn on via the 3-way
dimmable touch switch and enjoy.
Suitable Bulbs
Each socket accepts dimmable bulbs of
E26 base to a maximum rating of 25W.
Recommend 25W A15 E26 dimmable
incandescent or 8W A15 E26 dimmable LED
or smaller bulbs.
AFL012US
4a
AAIN005013
A
B
C
E
D
Bulb
Touch
Switch
Wireless
Charger