User manual

5
ENGLISH
Use
1. RINSE HOLD button
(Easy iron. If you use this button it will be easier to iron
the fabrics later).
Pressing this button together with the programs for
delicate fabrics, the water will hold up in the wash tub at
the end of the cycle. Press again to drain the water and
take out the clothes.
2. “NO SPINNING” button
Pressing this button before starting the “intense” washing
programmes all spinnings will be excluded. The other
steps of the program remain unchanged.
3. button
Pressing this button before starting the intense program
there will be one rinse less which leads to energy and
water saving.
4. On/off lamp
It lights when the appliance is operating.
5. Temperature selector
This control allows you to select the temperature of the
washing cycle in accordance with the kind of clothes to
be washed.
Turn the control until the required temperature coincides
with the marker.
On the program table you will find the most appropriate
temperature for each kind of washing. Selecting any
program can be run through with cold water. This will
ensure a saving in electricity consumption.
6. Program selector
To select the required program turn the control clockwise
until the marker on the top coincides with the letter of the
required program (reference mark on the control panel).
If at any chance you pass by the required letter NEVER
TURN THE CONTROL ANTICLOCKWISE just continue
clockwise until the required letter is reached again.
Control panel
35.292.883…WH 262.qxd 10/11/06 11:14 Página 5