Installation Guide

An exploded view of a typical shower anged drain assembly is shown on the left

for your reference. This assembly can be made from PVC, cast iron or other

composite materials.

STEP 1: Pre-slope shower pan and install waterproong per manufacturer’s

instructions; any waterproong material or procedure can be utilized

(i.e. vinyl, CPE membrane, roll/paint on, metal pan, hot mop, surface

sheet membrane, etc.). Perform leak test as required.

STEP 2: Remove adjustable drain barrel and replace with the LUXE Square Tile

Drain threading into clamp ring and drain base.

STEP 3: Build mortar bed and install tile to create a 1-2% grade towards drain.

STEP 4: Install tile into tile insert tray. Insert tile tray into drain body.

STEP 5: Finish by sealing the drain perimeter with a high quality exible sealant.

LUXE INSTALLATION ADVANTAGES AND BENEFITS:

- LUXE innovative products are constructed of 100% stainless steel—requiring

zero maintenance—and are durable, recyclable and provide a lifetime of form

and function.

- LUXE drains install independent of any waterproong method, material or procedure.

- All LUXE Drains t atop any standard clampdown oor drains of any construction -

PVC, ABS, cast iron, etc.

***

Ensure compliance with all local codes and requirements

***

LUXE Square Tile Drain is a unique drain strainer replacement allowing your shower

drain runo to virtually disappear into your oor. Its stainless steel construction

consists of a removable tile tray and a solid drain body with a central outlet for

installation into your tile bed atop any standard clamping oor drain.

Specications

Drain Body 5” x 5”; Body depth of 0.87” (22mm), excluding outlet.

Material of Construction

18 gauge stainless steel, with 2.0” (50mm) diameter central

outlet for insertion in 2” nominal anged oor drains.

Tile Tray (Removable) 18 gauge stainless steel.

Tile Tray Face 4.25” by 4.25”

Depth Suitable for tile up to 0.39” (10mm) thickness.

Square Tile Drain Installation Overview

P.O. Box 8064 | Atlanta, GA 31106 | www.lineardrains.com

Provided

Others

PAGE 1
Square Tile Drain Installation Overview An exploded view of a typical shower flanged drain assembly is shown on the left for your reference. This assembly can be made from PVC, cast iron or other composite materials. Provided by Others STEP 1: Pre-slope shower pan and install waterproofing per manufacturer’s instructions; any waterproofing material or procedure can be utilized (i.e. vinyl, CPE membrane, roll/paint on, metal pan, hot mop, surface sheet membrane, etc.). Perform leak test as required.