Use and Care Manual

Product Name:

Farmhouse White and Natural Wood Single Shelf Console Table

Product #:

WHIF1610

Instruction Manual

Please save this manual for future reference.

Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards of safety

and quality.

PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.

Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged parts. If any

parts are missing or damaged, do not attempt to assemble or use the product.

CARTON CONTENTS:

Assembly and Instruction Procedure (no tools required for assembly):

Step 1

Flip table (Part A) upside down making sure to put on a soft surface to protect the table surface. Connect Part A (tabletop)

and Part C (table legs) by aligining the holes with the pre-installed bolt inside the leg (Part C), and turn clockwise to tighten.

Do not overtighten to prevent the wood for splitting.

Step 2

Next align the holes in Part B (shelf) to the holes in Part C (legs). Then connect the table assembly and Part D (table feet) by

aligining the holes with the pre-installed bolt inside the feet (Part D), and turn clockwise to tighten. Do not overtighten to

prevent the wood for splitting.

PAGE 1
Instruction Manual Please save this manual for future reference. Product Name: Product #: Farmhouse White and Natural Wood Single Shelf Console Table WHIF1610 Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY. Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged parts.
PAGE 2
Instruction Manual Please save this manual for future reference. Product Name: Product #: Farmhouse White and Natural Wood Single Shelf Console Table WHIF1610 Image for reference: Step 3 Gently shake the table to esure that the table is sturdy. Tighten as needed without overtightening the bolts. Carefully flip your table upright, and check again for sturdiness.