Instructions / Assembly

ASSEMBLY INSTRUCTIONS

PART LIST

ITEM DESCRIPTION

QTY

SEAT 1 PC

LEG 2 PCS

LEG SUPPORT 2 PCS

LUNA COUNTER STOOL - 24''

HARDWARE LIST

ITEM DESCRIPTION

QTY

1 JCBC BOLT M6 x 20mm 4 PCS

2 M6 FLAT WASHER 4 PCS

M6 SPRING WASHER 4 PCS

4 WOOD SCREW M4 x 38mm 4 PCS

M4 ALLEN KEY (BALL SHAPE)

1 PC

STEP 1

1 OF 4

Read this instruction carefully. See hardware and furniture part list for guidance.

Be sure all parts are complete before assembly. Place all wooden furniture

parts on a clean and flat soft surface to prevent from being scratched.

Follow the figure to start assembling.

CAUTION : 1. Do not FULLY - TIGHTEN the nuts or nut bolts until they are ready for assembly.

2. Do not OVER - TIGHTEN the nuts or bolts to avoid causing damages to the thread.

3. Keep all hardware parts out of reach of children.

NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.

Tools needed : Screwdriver (not provided).

PAGE 1
LUNA COUNTER STOOL - 24'' ASSEMBLY INSTRUCTIONS Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all parts are complete before assembly. Place all wooden furniture parts on a clean and flat soft surface to prevent from being scratched. Follow the figure to start assembling. 1 OF 4 PART LIST ITEM DESCRIPTION A SEAT B CAUTION : 1. Do not FULLY - TIGHTEN the nuts or nut bolts until they are ready for assembly. C 2.
PAGE 2
ASSEMBLY INSTRUCTIONS 2 OF 4 STEP 2 B C 4 STEP 2 5 B 3 2 1
PAGE 3
ASSEMBLY INSTRUCTIONS STEP 4 STEP 5 INSTRUCTIONS FOR ADJUSTING LEVELER : POSITION THE CHAIR IN YOUR SPACE AND LOCATE THE LEVELER UNDER EACH LEG. TURN THE LEVELER COUNTER-CLOCKWISE TO EXTEND THE LEVELER AND CLOCKWISE TO RETRACT IT.
PAGE 4
ASSEMBLY INSTRUCTIONS STEP 6 4 OF 4