Stainless Steel Farmhouse Kitchen Sinks Installation Guide Features: - Contemporary single / double bowls design (varies by models) - Noise reduction sound dampening technology with insulation coating - Premium T304 stainless steel construction Luxier 1 Rev.
Thank you for purchasing Luxier products. Please read the information below and keep this installation guide for future reference. If you require assistance, please contact our customer service department at 1-877-711-8828, Monday - Friday 9AM - 5PM Pacific Time or by email at support@luxierusa.com. Important Information • Due to the undercounter installation, it is recommended that the installation be performed by trained and experienced installers.
Installation IMPORTANT! It is highly recommended the sink to be installed by a professional installer. 1. Provide your countertop fabricator with the included cut-out template to determine the size of the opening and the placement of the sink. When determining anchor locations, allow space for faucet clearance. The farm sink can be installed either flush with the countertop or under the countertop. Please refer to the figure A and B below. Figure A. Flush Mount Option 1 Figure B.
2. Cut the top rail and center support on the base cabinet. Read the sink dimensions carefully before making cuts to the base cabinet. Consult a contractor or installer if necessary. 3. Install wood supports. Make sure the supports are level and secured to the base cabinet with screws. Luxier 4 Rev.
4-1. Option 1 Install the countertop. Make sure the countertop is level and there is enough clearence for the farm sink. Option 1 4-1. Option 1 Install the farm sink after the countertop has been installed. Apply a bead of silicon sealant at the edge where the sink meets the countertop and the cabinet. Wipe away any excess sealant. Option 1 Luxier 5 Rev.
4-2. Option 2 Place the sink on the support and verify it is level. Make adjustment and shim as needed. Secure the sink with adhesive. Option 2 4-2. Option 2 Install the countertop. Apply a bead of silicon sealant and fill any gap where the countertop sits on the sink. Wipe away any excess silicon sealant. Option 2 Luxier 6 Rev.
Maintenance Guide 1. Regular cleaning can keep the original appearance of the sink. Use a mild detergent such as liquid dishwashing soap and warm water for cleaning. Rinse thoroughly with clean water to remove any cleaner residue and towel dry the sink immediately. 2. Some discoloration spots are caused by hard water or household substances. These spots can be removed with special cleaning / polish products specifically for stainless steel. 3.