Instructions / Assembly

ManualsBrandsLuxier ManualsBath67 in. Acrylic Flatbottom Luxury Contemporary Freestanding Soaking Bathtub Spa in White

072018 Rev. 2Luxier

Freestanding Bathtub Installation and Care Guide

Model Numbers:

FSB-01, FSB-02, FSB-03, FSB-04, FSB-05, FSB-06, FSB-07, FSB-08

Features:

- Contemporary Freestanding Design

- Integrated Overow System

- Adjustable Feet for Easy Installation

Materials:

- Acrylic / Fiberglass Composite

Luxier

1-877-711-8828

support@luxierusa.com

Summary of content (6 pages)

PAGE 1
Freestanding Bathtub Installation and Care Guide Model Numbers: FSB-01, FSB-02, FSB-03, FSB-04, FSB-05, FSB-06, FSB-07, FSB-08 Features: - Contemporary Freestanding Design - Integrated Overflow System - Adjustable Feet for Easy Installation Materials: - Acrylic / Fiberglass Composite Luxier 1-877-711-8828 support@luxierusa.com Luxier 1 072018 Rev.
PAGE 2
Thank you for purchasing Luxier products. Please read the information below and keep this installation guide for future reference. If you require assistance, please contact our customer service department at 1-877-711-8828, Monday - Friday 9 AM - 5 PM Pacific Time. Or by email at support@luxierusa.com. Before You Begin IMPORTANT: • Read and understand this installation guide completely before installation. It will increase the chance of a successful installation.
PAGE 3
Important Safety Instructions Risk of Personal Injury! Bathtub may become slippery when wet. Exercise caution when entering and exiting the bathtub. Do not overfill the bathtub before entering. Overfilling will cause overflow and slippery conditions. Risk of Drowning! Do not leave children unattended when using the bathtub. Supervise small children at all time when using this bathtub. Risk of Personal Injury! Accidental falls may occur.
PAGE 4
Installation - Site Preparation • • • • Provide sufficient floor support. Check the floor at the installation site and make repairs as needed. Waterproof the floor is highly recommended. Finished floor must be level. Provide adequate clearance on all sides of the bathtub. Minimum of 2 inch waste drain pipe is required. Installation - Drain Assembly NOTICE: It is recommended to dry fit the parts before installation. 1. Place a large drop cloth on the floor to protect the bathtub. 2.
PAGE 5
Installation - Bathtub CAUTION: Risk of Personal Injury. Get extra help when moving the bathtub into its final position. 1. Use a level to make sure the bathtub is level in all direction. (Fig. 2) 2. Adjust the feet under the tub as needed. 3. It is recommended to leave a 1/16” to 1/8” gap all around the base of the bathtub. 4. Close the drain and remove any debris or plastic films from the tub. Wipe the surface clean with a piece of soft cloth. 5.
PAGE 6
Warranty Thank you for purchasing Luxier products. Please read the information below and keep this installation guide for future reference. If you require assistance, please contact our customer service department at 1-877-711-8828, Monday - Friday 9 AM - 5 PM Pacific Time. Or by email at support@luxierusa.com.