Specification

4
KTS21 Rev.1 07/2018
Luxier USA
Installation
A. Shut o water supply at the valves.
Remove old faucet and clean the
mounting surface for installation of new
faucet.
B. Insert the hoses and shank through
the hole. The faucet hole on the mount-
ing surface should be 1 1/2” in diameter.
A
B
14
07
07
16
17
D
01. Handle
02. Setscrew
03. Handle Base
04. Cap
05. Bonnet
06. Cartridge
07. Pull Out Hose
08. Sprayer Head
09. Shank
10. Rubber Washer
11. Metal Washer
12. Brass Nut
13. Screws
14. Counter Weight
15. Water Supply Hoses (non-
removable)
16. Water Inlet Tube
17. Rubber Washer
09
10
12
11
13
C
C. Remove the screws (13) from locking
nut (12). From under the sink, install
the rubber washer (10), steel washer
(11) and locking nut (12) onto the
shank (09) Tighten the locking nut with
a basin wrench or the socket tool and
install the screws (13) to secure the
faucet in place.
E1. Apply Teon (TPFE) tape on the shut
o valves. Thread the tape in counter-
clockwise direction.
E2. Use an adjustable wrench to tighten
the water supply hoses, please do not
overtighten the connections.
E1
Flexible water supply line
E2
F
F. Turn on water supply and remove
spray head from the pull out hose. Turn
on the faucet and let the water run for
about 1 minute to ush out any debris
in the system. Check for leaks at all
connection. Reattach the spray head
when done.
01
02
03
04
05
06
09
15
16
17
10
11
12
13
14
07
08
D. Install counter weight (14) onto pull
out hose (07). Connect the pull out
hose to water inlet tube (16). Be sure
to install rubber washer (17). Do not
overtighten the connection.