Installation Guide

Luxier SP20-SS Rev. A4 0220187
Installation
1. Remove top cover. Attach the top panel to the main body
with the supplied nuts and bolts. Run the water supply hoses
through the hole on the top panel.
2. Trim o excess water supply hoses and attach to the spray
head unit according to the hose labels and close the top cover.
1
2
3
4
5
3. Install hand shower cradle (1) to the shower panel by installing
the rubber washer (2) and the locking nut (3) and attach white
plastic hose tube connector (5) with PVC tubing to complete the
connection. (NOTE: Make sure the silicon gasket (4) is seated
properly inside the connector.)
4. Connect hand shower hose to the main panel body and
connect the hand shower wand to the hose. Make sure the
silicon gaskets are seated properly to prevent water leak.