Installation Guide

Luxier SP20-SS Rev. A4 0220188
Installation (cont.)
5. Mark the positions of the 2 brackets on the wall and prepare
the tile wall for drilling. Use a piece of painters tape or masking
tape over the drill area to prevent damages to the tiles.
(NOTE: The distance between the two brackets should be 700
mm or 27.56”)
700mm
27.56”
1”
6. Using a drill with a tile bit, drill the hole slowly into the tile. Do
not drill into any piping or wiring in the wall. Insert the anchors
into the wall.
7. Secure the mounting brackets to the wall with the screws.