As of 03/18/20
Lighting Controls 1. 2. 3. Saved Presets Library Mix – Mixing board mode Modes – Access all of the different types of lighting modes (CCT, HSL, Effects, etc) Connected Lights: This area lists all the currently connected lights, including any Demo lights.
Main interface: Single Selection & Fixture Menu Once there are lights connected, you will be able to select them in “Single” mode by tapping the name of the light. These bars represent the color / setting the light is currently using. Touch the “i” next to the name of a connected light to access the Fixture Menu.
1. CHANGE THE LIGHT ’S NAM E 2. RESET CONNECTION POLICY a. THE LIGHT WILL NO LONGER BE SET TO “ALWAYS CONNECT” 3.
THE FOLLOWING INFORM ATION WILL BE DISPLAYED AT THE TOP OF THE POP-UP: 1. TYPE OF LIGHT 2. INSTALLED FIRMWARE V ERSION 3. IF THERE IS AN UPDATE AVAILABLE 4.
THE OPERATING STATUS BAR WILL SHOW YOU: Current Temp Battery Level Current Voltage Current Temp External Power Current Voltage
Select each light for the group, and tap “Save Group” You will see all connected lights when you create a group. You will be prompted to name the group to create it.
Once the group is created, you will see it in the menu on the left. Tapping the arrow on the right will open the status menu (similar to the Fixture Menu) This will show you which lights associated with the group are connected.
This mode selects every fixture that is connected to the app. ** PLEASE NOTE ** When controlling all lights, or a group of lights, the control options will be limited depending on the type of lights being used. Example: If you group a Timpani, a Cello and an original Viola, you will be limited to the features of the original Viola (No filters and limited effects modes).
The “Mix” mode allows you to control the intensity lev el of all connected lights or groups simultaneously. 1. In this example, we are showing “single” mode, and you can see each light listed with their own intensity slider. 2 2. On top is the Master intensity slider. This controls the ov erall intensity of ev erything connected to the app. 3.
This is available in ALL lighting modes 1. Once you have specific setting you’d like to save, tap the star button. 2. You will be prompted to name your setting.
This is accessible in ALL lighting modes 1. To access your saved settings, tap the “SAVED” button on the top left. 2. You will then be taken to your saved settings.
Each saved preset contains the following information: 1. Intensity 2. Mode Settings 3. Custom name 4. Date Created 5.
The information on the preset will change based on the mode.
1. Tap the Folder icon to create a new folder. 2.
1. Tap and Hold a preset, then drag it to the newly created folder. 2. The Preset will then be moved to the folder.
1. Here is the view inside the folder with the selected preset.
Download Upload You can Upload your custom preset library to the cloud by tapping the Upload button You will receive a four-character code that can be used to download those presets to any device with the Composer App installed. Tap the Download button to enter in the code.
After tapping “Modes” you will be taken to the last mode that was used with the selected light or group. (A light / Group must be selected to access the modes) To access other modes, click the icons on the bottom of the screen.
CCT: HSL: RGB: GEL: Select and adjust CCT / White light Select and change HSI mode Select and change RGB sliders Select and change Gel filters and base CCT v alue (+/- Green depends on connected light) (Hue, Saturation, Lightness) (Using Color graph) (Adjust Red, Green and Blue source based on sliders) (Not av ailable for original Viola)
Effects: Select, adjust and run Built-in effects (Original Viola will have limited access to effects) App Effects: Sequence: Camera: Select, adjust and run App-based effects Create custom lighting sequences using existing sav ed settings Select and recreate colors using the camera on your mobile dev ice. (We’ll get into that...
CCT mode allows you to control and customize the color temperature of white light being used by the selected light using three types of controls. 1. Slider with color representation 2. Number entry 3. Preset Icons 4.
1. Tap and drag the circle on the on the slider to adjust the CCT. 1 2. You can also tap here to enter a custom CCT value (in 50K increments) 3. You can also tap the icons here for CCT presets (ie.
+/- Green control*: 1. Tap and drag the circle to add a green or magenta shift to your CCT light. 2. The “N” resets it to 0% or neutral. 3.
Using the Color Graph: 1. Tap and drag the circle to select the color you want quickly. 2. This color graph represents all 360° along with the Saturation. 3. The status bar will change based on the selected color. 4.
Setting the White Point*: 1. Tap and drag the circle or tap the number on the right side of the slider 2. To return to the Default setting (6500K), simply tap the Default button. *For more information regarding the Floating White Point feature , please visit LuxliLight.
Using the RGB Sliders: 1. There are three sliders: (Red, Green & Blue) that can be adjusted by dragging the circles. 2. You can also tap any of the numbers to enter in a value (0 - 255) * NOTE * These sliders will only cont rol t he mix of colors, not t he intensity level of t he out put.
Example of mixing colors: How we created a peach color. 1. 2. 3. In each channel, you have a preview of what happens to the color when you adjust each channel. Example, if you reduce the amount of GREEN in the mix, the color will become more red. If you reduce the RED, it will become more green.
In GEL mode, you will be able to access all 150 built-in digital filters*. 1 1. Selected filter name and number 2 2. CCT adjustment slider (Tap and drag to adjust) 4 3. Current CCT, (tap to enter value) 4. Gel selection area (tap to select) 3 *NOT AVAILABLE FOR VIOLA-5 (ORIGINAL VIOLA).
In the Effects tab, you will be able to access and configure all 10 built-in effects*. Using CCT Chase as an example, you can see the slider and radial dial types of settings 2 3 4 1. Current Effect 2. Adjustment Slider 3. Tap to Enter Values 4. Other Options can be dragged 1 *NOT AVAILABLE FOR VIOLA-5 (ORIGINAL VIOLA).
Listed above are the effects that are built in to Luxli Lights. These will have the same options and settings available on the lights themselves, and will sync to each other if used in a group. Once you have used an effect with a light, those settings will then be saved on the light itself so you can use that effect again without having to connect to the app again. There are some effects available for the original Viola, but it requires that the light stays connected to the app to work.
The Composer features a new “App Effects” mode. These new effects will only be accessible while connected to the app and cannot be saved on the lights like the original effects mode.
With Sequence Mode You’ll be able to take any of your sav ed settings and place them in a timeline, much like a DMX board. Here are the basics of the interface: 1. Sequence Timeline / Chase 2. ”Cell” (Sav ed Preset) 3.
With Sequence Mode You’ll be able to take any of your sav ed settings and place them in a timeline, much like a DMX board. 7 1. Create a Cell. 2. Step backward 3. Start the sequence 4. Step forward 5. Repeat sequence 6. Clear sequence 7.
Stepping and playing a sequence*: 1. To start/stop the sequence, press the play button. 2. To step forward and backward through the sequence, tap either arrow. 3. To have the sequence repeat, tap the repeat icon.
Once you tap the “Add a Card” icon, you will be prompted to choose the type of cell.
Within each Normal cell, you’ll see the following options: 1. Saved Mode: a. Choose the saved setting you want. 2. Duration: a. Set duration for the before moving to the next cell 3. Target(s): a. Set which lights will use this setting Tap the “+” key on the side to access the selection screen If you want to change any option, tap the “+” again, and it will return you to the option screen.
The Crossfade Cells have fewer options but have stricter requirements. 1. Placement: a. A crossfade needs to be placed either before or after a Normal Cell. b. If you place the crossfade cell at the beginning or end of a sequence, the light will dim appropriately. 2.
Saved Mode selection: When choosing a favorite, you will see all the available saved settings. Tap to select the one you want, and then tap “Done” at the bottom.
In sequence mode, there are two types of durations: When Manual Duration is selected, you will tap have to manually tap to get to the next step. Timer allows you to set how long until the next cell in Milliseconds, Seconds or Minutes using the dial below.
Choose which light or groups of lights you want to use this command. You can either use the current light selected, choose individual lights, or choose a custom group.
To remove a Cell, simply swipe the card up, and it will fly off the sequence. To delete the ALL Cells, tap the Trash Can icon to delete all cells. You will be prompted to confirm before all cells are deleted.
To move a cells position in the sequence, tap and hold the desired cell, and drag left or right.
Camera mode replaces the “Color Picker” mode on the previous app. To capture a color from a photo, tap the screen, and it that color will be recreated on the active light or group. You can save the color using the save icon on the top right. ** NOTE ** On the Android version of this app, the camera view may appear “squished”. This is due to different phone manufacturers hardware. This will does not have any effect on the ability to pick a color in camera mode.
THANKS FOR READING AND ENJOY THE NEW FOR MORE LUXLI COMPOSER INFORMATION, VISIT WWW.LUXLILIGHT .
