Operation Manual

15
Playback 2
MP3
When an MP3 disc is loaded, directories will be shown on the
screen.
Select a directory by pressing the
5
/
b
/ g / t buttons and press
the PLAY button (
y).
Track numbers and titles(file names) will appear on the screen.
Select a track and press the PLAY button (
y). Playback will start
from the selected track.
• During playback, elapsed time of the current file is displayed on
the front panel display.
• To change the play mode, press the REPEAT 1/ALL button until
the desired mode is displayed on the TV screen.
JPEG CD
When a JPEG disc is loaded, directories will be shown on the
screen.
Select a directory by pressing the
5
/
b
/ g / t buttons and press
the PLAY button (
y) or ENTER button.
File names will appear on the screen. Select a file and press the
PLAY button (
y). Slide show will start from the selected file.
• During playback, you can press the SKIP buttons (
.//) to
select another picture. You can also use the (
5
/
b
/
5
/
b
) but-
tons to rotate/flip the image on the TV.
• Some files on the JPEG disc may be distorted during playback
due to the configuration or characteristics of the disc.
WMA
Listening to WMA (Windows Media Audio) CD-R/CD-RW
This unit can play CD-R/RW music files that have been recorded in
the WMA (Window Media Audio) audio compressing format.
Windows Media and the Windows logo are trademarks, or regis-
tered trademarks of Microsoft Corporation in the United States
and/or other countries.
WMA (Windows Media Audio) : New audio coding of Microsoft
Corporation.
Uses of recordings you have made other than for your personal
enjoyment are not permitted under the Copyright Law without per-
mission of the copyright holder.
The method of playback is the same as "Listening to Recorded
MP3".
• In the file display of the disc information screen, WMA files will
be displayed with the "WMA" icon instead of the "ROM" icon.
(Files for which the "WMA" icon is not displayed cannot be
played. There will be a skip and the next file with an icon will be
played.)
NOTES:
• Files recorded with a sampling frequency (fs) of 44.1, and 48 kHZ
are supported.
• Programmed playback cannot be performed with WMA discs.
• The digital output at the time of WMA file playback is converted
to PCM regardless of the initial settings.
• Please use discs that have been recorded in conformity with the
ISO 9660 level 1/level 2 CD-ROM file system. (Extended formats
are excluded.)
• Copyright protected files cannot be played. Also note that
depending on the writing software and conditions, playback
might not be possible, or the files might not be displayed proper-
ly.
• Playback of the CD-R/RW might not be possible depending on
the disc characteristics, soiling, scratches, and other factors.
• Bit rates of 64 k to 160 kbps are supported for WMA files that
have an extension of ".wma" of ".WMA".
• This unit can display the folder names and file names on the
screen. Up to 11 half-width alphanumeric upper case characters
and symbols (including the underscore symbol) can be dis-
played. Kanji, hiragana, katakana and other characters cannot
be displayed.
• While in the stop condition, the TIME DISPLAY button of the
remote control can be used to switch and display the title names
and the artist names. (One folder has a capacity of up to 99 files.)
• Recorded discs with no more than 99 files per folder are recom-
mended. Multiple folder configurations are possible: however,
depending on the configuration, recognition and playback of all
the folders and files might not be possible.
• Multi-session discs can also be played back, however, playback
of discs that have had session closure within 10 sessions.
• Direct track selection using the remote control numerical keys (0
to 9, and +10) can specify up to 179 tracks (179 files) per folder.
when 179 tracks are exceeded, while the unit is stopped, use the
cursor buttons at the disc information screen to select the files,
and use the play button or the ENTER button to play.
directory's name
file name
file number
play mode
d
c
b
a
DVD/CD/SACD/MP3/JPEG/WMA