Operation Manual

16
SACD
There are three types of Super Audio CDs: single-layer, dual-
layer, and hybrid.
Each may contain two areas of recorded audio or sound modes:
High Quality Two-Channel and High Quality Multi-channel.
A single-layer SACD may contain both Two-Channel and Multi-
channel.
A dual layer SACD may contain both Two-Channel and Multi-
channel, but twice the amount.
Hybrid SACDs have two layers, the CD and SACD layers.
Within the SACD layer are the SACD Two-Channel area and
SACD Multi-channel area.
If you have a hybrid SACD, you need to choose the layer/sound
mode you want to play - CD, SACD Two-Channel, or SACD Multi-
channel.
Layer Changing
Press the MENU button repeatedly to choose the CD layer or
the SACD layer when playback is stopped.
Press the PLAY(
y) button.
The layer you select will play.
• You cannot switch between the CD and SACD layers during
playback.
Channel Changing
Press the AUDIO button repeatedly to choose the Multi-chan-
nel or the Two-Channel when playback is stopped.
The sound mode will appear on the front panel.
Press the PLAY(
y) button.
Notes:
With Super audio CDs, Digital audio signals cannot be output
from the digital out terminals. Use analog connections.
2
1
B
2
1
A
SACD Sound Mode
B
1
1
B
2
A
A
MENU
PLAY
AUDIO
DVD/CD/SACD/VCD/MP3
Playback 3
DC
F
E
B
A
POWER
PLAY
PAUSE
OPEN/CLOSE
STOP
To start playback
In the stop mode, press the PLAY button (y).
To suspend playback temporarily (pause mode).
Press the PAUSE button (J) during playback.
The image stills with DVD discs, or music is interrupted with
MP3 or CDs.
To resume playback, press the PLAY button (
y) or PAUSE but-
ton (
J). (for CD, SACD, VCD, MP3 and WMA)
To stop playback of a CD, VCD, and SACD or MP3.
Press the STOP button (H).
To stop and resume playback of a DVD
If you press the STOP button (H) during DVD playback, the unit
runs in RESUME mode, as the display indicates.
If you want to cancel the RESUME mode and stop playback
completely, press the STOP button (
H) again.
To resume playback
When you stop playback of DVD by pressing the STOP button
(
H), the interrupted point is kept in memory and playback starts
from that point when you press the PLAY button (
y).
< The memory is cleared if you disconnect the power cord.
< If you open the disc tray during playback of a DVD, “OPEN” is
displayed on the TV screen. If you close the disc tray with the
DVD still on it, “CLOSE”, ”DISC LOADING” and “PRESS PLAY
TO RESUME PLAY” are displayed on the TV screen and play-
back starts from the beginning of the disc, not the point where
playback was stopped. If you press the PLAY button (
y)
before that message has gone out, playback starts from the
interrupted point.
To open the disc tray
Press the OPEN/CLOSE button (L) to open the disc tray.
Power Off Function
When the unit is left in the stop mode for about 8 minutes, the
unit enters power standby mode.
F
E
D
C
B
A