Operation Manual

To check the programmed content

In the stop mode, press the 5orb button repeatedly.

The programmed content (program number, track number and

playback time) will be shown on the display in the programmed

order.

To delete a programmed track

In the stop mode, press the 5orb button repeatedly until the

programmed track to be deleted is displayed. Then press the

CLEAR button. The selected track is deleted from the program and

the track programmed next is moved to take its place, and is

shown on the display.

To overwrite a programmed track

In the stop mode, press the 5orb button repeatedly until the

programmed track to be changed is displayed. Select a new track

number using the numeric buttons, and then press the ENTER but-

ton.

To add a track to the end of the program

In the stop mode, press the 5 button repeatedly until “--” is dis-

played. Select a track number using the numeric buttons, and

then press the ENTER button. The track is added to the end of the

program.

To resume normal playback

In the stop mode, press the PROGRAM button to resume normal

playback. The “PROG.” indicator will go off and the program

mode will be cancelled.

However, the programmed content isn’t lost. You can return to the

programmed playback by pressing the PROGRAM button and the

PLAY button.

To clear the programmed content

With the unit stopped and the “PROG.” indicator lit, press the

CLEAR button to clear the programmed content.

If you are checking the programmed content, press the STOP but-

ton and the CLEAR button.

If one of the following buttons is pressed, the programmed con-

tent will also be cleared:

OPEN/CLOSE, POWER

Programmed Playback 2

CD/VCD

PROGRAM

STOP

POWER

ENTER

OPEN/CLOSE

CLEAR