Operation Manual

43
Troubleshooting
In case of any trouble with this unit, please take the time to look
through this chart and see if you can solve the problem yourself
before you call your dealer or a LUXMAN service center.
No power
eCheck the connection to the AC wall outlet.
Playback does not start.
eReload the disc with the label side UP.
eIf the disc is dirty, clean the surface of the disc.
eA blank disc has been loaded. Load a prerecorded disc.
eCheck the region code of the DVD.
PROHIBIT icon A appears on the screen.
eThe operation is not permitted by the disc or the unit.
eNote that during playback of a title part (cautions, software
maker's logo, etc.), most operations are prohibited by the
disc.
eIf another operation is still in process, wait a moment and try
again.
Picture playback stops and operation buttons do not work.
eTurn the unit off and back on again and restart the playback.
No picture.
eTurn on the TV.
eCheck that the system is connected properly.
eMake sure you have selected the proper video input on the
TV so that you can view the pictures from the DVD player.
eIf your TV is not compatible with progressive scan, do not
set the progressive mode on. (See page 9)
Picture noise.
eIf video from this system has to go through your VCR to get
to your TV, the copy-protection applied to some DVD pro-
grams could affect picture quality. Please connect the unit
directly to your TV.
The image is distorted or monochromatic.
eThe color system selected does not match your TV. Press
the NTSC/PAL button of the remote control unit once or
twice.
eSelect the aspect ratio to match your TV.
The aspect ratio of the screen cannot be changed.
eThe aspect ratio might be fixed by the disc.
eDepending on the TV, you may not be able to change the
aspect ratio.
There is no sound or only a very low-level sound is heard.
eCheck that the speakers and components are connected
securely.
eCheck the operation of the connected component.
eCheck the Downmix setting. (See page 32)
eThe sound is muted during pause, slow-motion, fast for-
ward/reverse, and stepping playback. Press the PLAY button
to resume normal playback.
Severe hum or noise is heard.
eCheck that the speakers and components are connected
securely.
eThis unit cannot play such discs as CD-ROMs. Use a
playable disc.
Remote control doesn't work.
eIf the batteries are dead, change the batteries.
eUse remote control unit within the range (5m /15ft) and point
at the front panel.
eClear obstacles between the remote control unit and the
main unit.
eIf a strong light is near the unit, turn it off.
Sound skips.
ePlace the unit on a stable place to avoid vibration and shock.
eIf the disc is dirty, clean the surface of the disc.
eDon't use scratched, damaged or warped discs.
Playback sound isn’t full.
eIf you are listening to multi-channel sound through 2CH
AUDIO OUT, set Downmix setting to Stereo or Lt/Rt.
Some settings in the SETUP menu do not appear.
eSetup Menu mode is set to "Expert". (See page 36)
Cannot play multi-channel audio.
eSet the Downmix to “Multi-Channel”.
eCheck that the settings in the Speaker Setting screen are
correct.
eDisplay the disc menu and select a multi-channel audio.
No digital audio output.
eCheck that Digital Out setting is not set to Off.
Cannot output 96kHz or 88.2kHz digital audio.
eCheck that 96K LPCM Out is not set to 96K > 48K.
eSome copy protected discs do not output high sampling rate
digital audio.
ANGLE mark doesn't appear on the screen.
eSet both the Angle Indicator option and the On Screen
Display option to “On”.
If normal operation cannot be recovered, unplug the power cord
from the outlet and plug it in again. This resets the internal
micro-computer which can be disturbed during electrical
storms, power interruptions, et cetera.
Beware of condensation
When the unit (or a disc) is moved from a cold to a warm place, or
used after a sudden temperature change, there is a danger of
condensation; vapor in the air could condense on the internal
mechanism, making correct operation impossible. To prevent this,
or if this occurs, leave the unit for one or two hours with the
power turned on. Then the unit will stabilize at the temperature of
its surroundings.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or use
diluted neutral cleaning liquid. Be sure to remove any fluid com-
pletely. Do not use thinner, benzine or alcohol as they may dam-
age the surface of the unit.