Operation Manual

Remote Control Unit

The provided Remote Control Unit allows the unit to be operated

from a distance.

When operating the remote control unit, point it towards the

remote sensor on the front panel of the unit.

< Even if the remote control unit is operated within the effective

range, remote control operation may be impossible if there are

any obstacles between the unit and the remote control.

< If the remote control unit is operated near other appliances

which generate infrared rays, or if other remote control

devices using infrared rays are used near the unit, it may oper-

ate incorrectly. Conversely, the other appliances may operate

incorrectly.

Battery Installation

Remove the battery compartment cover.

Insert two “AAA“ (R03, UM-4) dry batteries. Make sure that the

batteries are inserted with their positive “

+“ and negative “_“

poles positioned correctly.

Close the cover.

Battery Replacement

If the distance required between the remote control unit and main

unit decreases, the batteries are exhausted. In this case replace

the batteries with new ones.

Precautions concerning batteries

< Be sure to insert the batteries with correct positive “+“ and

negative “

_“ polarities.

< Use batteries of the same type. Never use different types of

batteries together.

< Rechargeable and non-rechargeable batteries can be used.

Refer to the precautions on their labels.

< When the remote control unit is not to be used for a long time

(more than a month), remove the batteries from the remote

control unit to prevent them from leaking. If they leak, wipe

away the liquid inside the battery compartment and replace the

batteries with new ones.

< Do not heat or disassemble batteries and never dispose of old

batteries by throwing them in a fire.