User guide

- 25 -
• Dimension: This setting alters the perceived depth of the
surround field by creating a shallower presentation that
appears to move sounds toward the front of the room, or a
deeper presentation that appears to move the center of
the sound field toward the back of the room. The setting of
"O" is a neutral default, with the range of adjustment
shown as "R-3" for a deeper, rear-oriented sound.
• Panorama: Switch this setting on or off to add an envelop-
ing wraparound presentation the increases the percep-
tion of sound along the sides of the room.
• NIGHT
OFF: When OFF is highlighted, the Night mode will not
function.
MID: When MID is highlighted, a mild compression will be
applied.
MAX: When MAX is highlighted, a more severe compres-
sion algorithm will be applied.
• UPSAMPLING
The setting to turn the unit's upsampling feature on or off.
In normal use, this feature is turned off, which means that
digital sources are processed at their native sample rate.
For example, a 48kHz digital source will be processed at
48kHz. However, the LR-6500 allows you to upsample the
incoming 48kHz signals to 96kHz for added resolution.
NOTE: This feature is only available for the Dolby Pro Logic
ll-Music, Dolby Pro Logic ll-Movie, Dolby Pro Logic and
Dolby 3 Stereo modes.
SPEAKER SETUP
This menu allows you to switch the menu to change either
the speaker size setting or the exact crossover point used
for that speaker group. For the first pass through the menu,
leave the setting at its default option of SPEAKER SIZE, and
then proceed as outlined below. Once the speaker choices
have been set, you may wish to return to this line to change
the option so that the crossover settings may be adjusted.
D
5-Channel Stereo, 7-Channel Stereo
This mode takes advantage of multiple speakers to place a
stereo signal at both the front and back of a room.
Depending on whether the unit has been configured for
either 5.1 or 6.1/7.1 operation, one of these modes, but not
both, is available at any time. Ideal for playing music in sit-
uations such as a party, it places the same signal at the
front-left and surround-left, and front-right and surround-
right speakers.
The center channel is fed a summed mono mix of the in-
phase material of the left and right channels.
Stereo
This mode turns off all surround processing and presents
the pure left- and right-channel presentation of two-chan-
nel stereo programs.
PURE STEREO: When Audio input is selected analog, the
unit is in a "bypass" mode with no bass management.
DSP STEREO: When DSP Stereo is selected, the signal is
digitized and bass management settings are applied.
System Configuration
DOLBY SURROUND
When DOLBY SURROUND mode is selected, a menu will
be shown.
The choices on this menu include the selection of the actu-
al surround mode, the selection of rear channel post-pro-
cessing when the system is configured for 7.1 operation,
adjustments to the Night Mode when available with a
Dolby Digital soundtrack, the adjustment of special para-
meters available when either Dolby Pro Logic ll Music or
Dolby Pro Logic llx Music is selected as the surround mode
and control over digital upsampling, when available.
• Center Width: This setting adjusts the balance of the
vocal information in the front sound stage between the
center and front left/right speakers. The lower settings
spread the center channel sound more broadly into the
left and right channel s. A higher number (up to "7") pro-
duces a tighter center channel presentation.
C
DOLBY SURR
MODE : DOLBY PRO LOGIC
CENTER WIDTH : ----
DIMENSION : ----
PANORAMA : ----
NIGHT : OFF
UPSAMPLING : ----
BACK TO MAIN MENU
SPEAKER SETUP
MODE
LEFT/RIGHT
CENTER
SURROUND
SURR BACK
SUBWOOFER
: SPEAKER SIZE
: SMALL
: SMALL
: SMALL
: SMALL
: SUB
BACK TO MAIN MENU