Datasheet

https://www.luxonis.com Dec, 2021
5
6 OAK-D Lite with use of Y-adapter
Consumption of OAK-D Lite can be higher and will fall out of the USB2 maximum specified range of 900mA. If the
host is capable of delivering only 900mA current over a single USB port then Y-adapter provides an option to
have a separate power supply connected to the same USB device along with the data connection from the host.
This allows that OAK-D Lite can still be run on devices such as Raspberry Pi4 and similar hosts with lower power
capabilities on USB ports.
7 Mechanical Information
The following information is the most current data available for the designated device. This data is subject to
change without notice and without revision of this document.
Figure 2 – OAK-D Lite Mechanical measurements