User Manual

Customer Service Dept
2245 Delany Rd
Waukegan, Il 60087
Ph: 847-244-1800, 800-323-4656
Fax: [phone]
Instructions:
1. Take one of Tubular frame (B) and lay at. Attach Blow molded tray (A) and Angle
brace (E) to frame using Hex bolt (F), Washer (G) and Nut (H). (see image #1 on next
page). * Do not tighten the screws all the way down.
2. Assemble 2 other molded trays with tubular frame as step 1.
3. Assemble another side of tubular frame to blow molded trays. (as step 1 & 2).
4. To attach the caster, inserts Ring seater (I) over the stem in the caster, and using
Screw (J) and Spring waster (K) x with frame. Tighten casters with Hex wrench (L)
that is provided (see image #2 0n next page).
5. When unit is fully assembled, tighten screws all the way.
Assembly Instructions
Model ATC332