User guide

LEWTUD & LEWCTUD Series
®
10
Final Assembly
Step 17.
Place the top shelf over the four (4) short legs that are attached to the center shelf.
Step 18. Once the short legs are lined up with the mounting posts of the top shelf, tap the top shelf firmly onto the short
legs using the supplied rubber mallet. This will complete the first part of the assembly.
Step 19. Place the grommet pass through into the hole located behind the base block.
Rubber Malle
t
Power Cord
Storage Arm
Base Mount Assembly (pre-assembled)
Bottom Shelf
Center Shelf
Top Shelf
Grommet Pass
Through