User guide

LEWTUD & LEWCTUD Series
®
7
Electrical Assembly and Cable-Track Management System
Your Flat Panel Display Cart incorporates the Cable-Track™ Cord Management System. This exclusive feature
manages electrical cords, keeping them safely out of the way. This system includes a 3-outlet, 15 foot surge
suppressing electric assembly (U.L. and C.S.A. listed) which is built into the safety handle. Please review these
instructions carefully to maximize the added safety provided by Luxor’s Cable-Track™ Cord Management System.
Parts List
spilc-”E“ - 2 (A.)droc rewop detcetorp egruS - 1
s (C.)eit tnemeganam droC - 4 (B.)pilc reniater droc rewoP - 1
4 - Sheet met
al screws (D.)
Step 6. Firmly seat the 3-plug electric assembly
unit into the handle plug housing (the
top shelf of the cart will need to be
turned over in order to access the
underside of the handle).
Step 7. To secure the power strip, use the
power strip retaining bracket and
two (2) sheet metal screws and attach
using a flat tip screwdriver.
Step 8. After the power strip has been
mounted, route the power cord through
the cord retaining track.
Step 9. Attach the cord management tie into
the starter holes using a sheet metal
screw. Cut off any excess.
Step 10. Secure the power cord using the cord
management tie.
Power Strip Retaining Bracket
Cord Retainin
g
Trac
k
Screwdrive
r
Sheet Metal Screw
Power Strip
Cord Mana
g
ement Tie
Handle Plug Housing