Instructions / Assembly

www.luxorfur n.com
www.hwilson.com
01/31/13
Parts List
- Phillips Screwdriver
- Pliers or Adjustable Wrench
Position the bottom shelf B so that the
caster holes are facing up. Insert caster C
into the caster holes on the bottom of shelf
B. Use a mallet to set the casters properly.
Flip bottom shelf B so that it is on its side.
Set top shelf A so that it overlaps bottom
shelf B. Align the screw holes so that the
top shelf A is at the desired height.
Insert screw D through the aligned screw hole
of A and B and fasten nut E with pliers and
screwdriver. Place Non-slip mat on desired
shelf. The cart is now complete.
1 2 3
- Phillips Screwdriver
- Rubber Mallet
- Pliers or Adjustable Wrench
A
A
E
E
D
D
B B B
C
Adjustable Height
Metal Cart Instructions
AVJ42, W42A
Cabinet comes
pre-assembled
on units that
include a cabinet.
Non-slip mat
A x1 B x1 C x4
D x4 E x4
Tools Required