Crank Adjustable Flat Panel TV Cart Assembly Guide
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Parts List & Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembly and Installation Assembly of the right and left frame. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Attach lower cross supports and crank rod . . . . . . . . . . . . .
Parts List M x1 F x1 G x1 L x1 pre-installed M1 x2 screws M1 x2 H x1 A x1 B x1 N x1 J x1 P x1 K x1 C x2 R x2 D x1 E x1 Q x1 Hardware (Actual Size) 12 x4 13 x4 Small Large 9 x4 M8x35 6 x6 M8 10 x4 M6x16 11 x4 1 x4 M6x63 2 x3 M6x48 8 x1 3 x5 M6x40 4 x8 M6x15 5 x6 M8x15 M5x16 M4 7 x1 M5 14 x1 3 / 16
1 Assembly of the right and left frame C A C R 8 Tighten casters fully with included wrench Gather Parts: A,B,C,R,8 4 / 16 R B
2 Attach lower cross supports and crank rod A 4 x2 K 4 x2 P 4 x2 B 7 J 4 x2 P IMPORTANT: Using the crank handle for minor adjustments, align the crank adjustment rod so that it seats fully into both sides of frame.
3 Position flat panel mounting plate IMPORTANT: Position mounting plate N so that it is behind the screw hole tabs of the left and right frame B & A.
4 Attach flat panel mounting plate 6 x3 6 x3 5 x3 N 5 x3 14 5 x6 M8x15 6 x6 M8 7 / 16
5 Attach lower shelf to frame 1 Large r Gap H 2 H 3 3 3 3 3 7 Gather Parts: H & 3 x5 M6x40 8 / 16
6 Install the upper cross bar 1 G 2 G 2 7 2 Gather Parts: G & 2 x2 M6x48 9 / 16
7 Flip the unit upright B D Front Gather Parts: D 10 / 16 Heavy Lifting: Assistance Required
8 Attach upper shelf to frame 1 Sm alle r Ga F F p 1 x2 7 1 x2 2 7 Gather Parts: F 1 x4 M6x63 2 & 2 x1 M6x48 11 / 16
9 Install mounting hardware to display 1 L 9-11 x4 M 12-13 x4 Screen Size: 32˝- 80˝ Max. TV: 110 lbs. Per Shelf: 33 lbs.* Total Capacity: 209 lbs.* place allen wrench 7 into the hole and mark your bolt length.
10 Attach display to unit Make sure the crank adjustment is at the minimum required height so that the TV and shelf have proper spacing in between.
11 Install the locking system E Q E Q M1x2 x2 Gather Parts: Q , E , M1 14 / 16
12 Unit complete 50.5˝ 66.
Revision Date: 02/10/2017 Questions or Feedback Call Us at: 800-323-4656