Flat Panel Cart Assembly Guide Adjustable Height Flat Panel TV Cart with Media Shelf Designed for 32”-65” TV Panels VESA: 100 x 100 - 600 x 400 Max Load Capacity: 100 lbs Media Shelf Max Load: 10 lbs
Table of Contents Table of Contents and Warnings 2 Part List 3 Assembly and Installation 1. Installing the Casters and Poles 4 2. Adjusting the Pole Height 5 3. Installing the Media Shelf 6 4. Installing the TV Mount 7 5. Selecting the VESA pattern 8 6. Attaching the TV to the Cart 9 7. Cable Management 10 Tools Required Phillips Screwdriver Tape Measure Wrench Assistance Required WARNING! Severe personal injury and property damage can result from improper installation.
E D 8 5 F NOT USED G H 4 0 I 5 60 0 J 4 10
1.1 Install casters to base Turn base over 1.
2. Adjust the height of the telescopic mounting poles Step 1. Using your thumb or finger, depress the right upper pole spring plunger ball located at the cable window, and twist the upper pole 90 degrees. Pull the upper pole to your desired height, twist the upper pole toward the plunger holes, and engage the spring ball into the plunger hole and set as shown in Figure1. Step 2. Repeat with the left pole.
3.
4.
5. Select your VESA pattern and attach TV brackets E D (B,C)+D,A Spacer Suggestions 0 Note: To avoid damage, a spacer must be used when the mounting hole is minimal.
6.
7. Cable Management Note: Use caution when routing cables to avoid damage.
