Installation Guide

www.allstarlighting.com
4” RECESSED HOUSING
PACKAGE CONTENTS
INSTALLATION GUIDE
LR23786, LR23787
33 Randolph Ave. • Avenel NJ 07001 | 732-882-1500
1
4” DOWNLIGHT SQUARE TRIM CCT CHANGE
WARNING: For safety, read and understand instructions
completely before starting installation. Electricity
should be turned off at the fuse or the circuit breaker
box before installing the fixture. All electrical connections
must be in accordance with N.E.C or your local code.
1. Turn off the main power prior to installation
2. Remove the existing trim and bulb to gain access to the socket.
3. Screw in the E26 socket adaptor into the open socket. (FIGURE 1)
4. Plug in the quick connector. (FIGURE 2)
5. Once connector is attached, gently push trim into fixture opening until
flush with ceiling. (FIGURE 3)
6. (For 4” Downlights) Unscrew and adjust the plate inward or outward
for 4” diameter
CAUTION: DISCONNECT POWER BEFORE
CONNECTING TRIM TO HOUSING. FAIL TO DO
SO MAY PERMANENTLY DAMAGE THE LED
5” ( 4 IN)
3.24” ( 4 IN)
DOWNLIGHT
E26 BASE ADAPTER
FIGURE 2
FIGURE 3
FIGURE 1
2700 3000K 3500K 4000K 5000K