Installation Guide

www.allstarlighting.com

INSTALLATION GUIDE

LR24185, LR24187

33 Randolph Ave. • Avenel NJ 07001 | 732-882-1500

2X2, 2X4 LED FRAME PANEL

WARNING

– MAKE SURE POWER IS OFF BEFORE INSTALLING

– ALL THE INSTALLATIONS ARE REQUIRED TO BE

DONE BY PROFESSIONALS.

GND

AC - N

DIM +

DIM -

AC - L

YELLOW & GREEN

FRAME

PANEL

LED DRIVER

WHITE

BLACK

LED Chip

PC Cover

Aluminum

Sash

LED

Driver

Power Regulation

CCT Adjustment

STEP 1. Remove the ceiling tile where you need to install the Frame Panel

STEP 2. Carefully place Frame Panel on the T-bar and make sure it is secure and in place.

STEP 3. Place the driver on top of the adjoining ceiling tile

STEP 4. Connect the driver to the Frame Panel

STEP 5. Open the driver’s junction box and connect AC wire to driver (L= Black, N= White)

STEP 6. Place ceiling tile on top of Frame Panel

INSTALLATION INSTRUCTIONS

PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION AND KEEP FOR REFERENCE

SHUT OFF POWER BEFORE INSTALLATION

PAGE 1
www.allstarlighting.com INSTALLATION GUIDE 2X2, 2X4 LED FRAME PANEL LR24185, LR24187 LED Chip LED Driver WARNING CCT Adjustment PC Cover Power Regulation – MAKE SURE POWER IS OFF BEFORE INSTALLING – ALL THE INSTALLATIONS ARE REQUIRED TO BE DONE BY PROFESSIONALS. Aluminum Sash INSTALLATION INSTRUCTIONS SHUT OFF POWER BEFORE INSTALLATION PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION AND KEEP FOR REFERENCE STEP 1. Remove the ceiling tile where you need to install the Frame Panel STEP 2.