User's Manual

User Guide

Must be a minimum of 8, maximum of 63 characters

Can contain spaces or special characters (i.e. @#$%&*)

To change the WPA Passphrase, simply type in the desired passphrase, click Save,

then Reboot for the change to take effect.

NOTE: It is recommended to use a strong password containing:

More than the minimum number of characters

One or more capital letters

Numbers and/or special characters

Administrator Login: Sets the password for Administrator access to the

XenSmart™ web management interface. When connecting to the Access Point

through the XenSmart™ web interface, the user is prompted for a User ID (this is

always admin) and Password (the default value is “admin”). It is HIGHLY recom-

mended to change to a secure password when initially conﬁguring the Access

Point. To change the password, simply enter the new password, conﬁrm the

password, then click Save, and then Reboot for the change to take effect.

After conﬁrming the desired Quick Setup conﬁguration settings, select Save and

then Reboot for the settings to take effect.

5.3 Wireless

5.3.1 Basic Wireless Settings

Basic Wireless Settings: This screen allows the modiﬁcation of the following basic

settings for the wireless network: