User's Manual

luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460
User Guide
11
4.3 Environmental Requirements
X
Ethernet cable to provide Power and Data to the XAP-1030.
X
A computer supporting TCP/IP and equipped with a Web browser. Supported
Web browser versions include Microsoft IE 7.0 and up, Safari 1.0 and up, Mozilla
Firefox 1.0 and up, and Google Chrome 5.0 and up. The Web browser is used to
configure the XAP-1030.
X
The XAP-1030 uses 36-57VDC power. The POE injector power supply requires AC
100V ~ 240V, 50Hz ~ 60Hz.
X
Temperature of the operating environment: -04F~140F (-20C to 60C). Be sure to
place the access point away from heat generating devices.
X
Humidity of the operating environment: 5%-95% non-condensing. Do not place
the access point in an extremely dirty or damp location.
X
Keep the access point away from strong electromagnetic fields (i.e. Air
Conditioner compressors, fluorescent light ballasts, CRT monitors/televisions,
etc.), and free from vibration, dust and direct sun light.
4.4 Hardware Installation
4.4.1 Access Point Placement
This XAP-1030 uses an omni-directional antenna which is designed to provide 360
degrees of coverage. For maximum efficiency, it should be placed as close as pos-
sible in the center of the area in which you would like to provide coverage.
XAP-1030 Coverage Pattern
4.4.2 Mounting the Access Point on a Wall
The XAP-1030 can be mounted directly to a wall. It can also be placed on a desktop,
shelf, or other flat surface. Once the location has been selected, mounting the ac-
cess point directly to the wall or place it on a flat surface as demonstrated below: