User's Manual

luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460
User Guide
15
LEDs on the front of the XAP-1030
5 CONFIGURATION
5.1 Login
The XAP-1030 is not equipped with internal DHCP server. If connected to the Luxul
XBR-2300 Enterprise Dual-WAN Router, configuration will be automatic. Otherwise,
the IP address of the computer for login and configuration will need to be manually
configured. The table below lists the default parameters of the XAP-1030.
Parameter Default Value
Default IP address
192.168.0.12
Default user name
admin
Default password
admin
Login to the XAP-1030 Wireless Access Point with the following steps:
a. Be sure the XAP-1030 is properly installed and powered on
b. Open your Web Browser, and enter http://192.168.0.12.
The login window appears as shown below:
c. Enter the user name and password (default user name is ”admin” and default
password is “admin”), and then click “OK” to login to the Quick Setup window.