User's Manual

luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460
User Guide
19
NOTE: It is recommended to use a strong password containing:
w
More than the minimum number of characters
w
One or more capital letters
w
Numbers and/or special characters
X
Administrator Login: Sets the password for Administrator access to the
XenSmart™ web management interface. When connecting to the Access Point
through the XenSmart™ web interface, the user is prompted for a User ID (this is
always admin) and Password (the default value is “admin”). It is HIGHLY recom-
mended to change to a secure password when initially configuring the Access
Point. To change the password, simply enter the new password, confirm the
password, then click Save, and then Reboot for the change to take effect.
After confirming the desired Quick Setup configuration settings, select Save and
then Reboot for the settings to take effect.
5.3 Wireless
5.3.1 Basic Wireless Settings
Basic Wireless Settings: This screen allows the modification of the following basic
settings for the wireless network:
X
Wireless Radio: This field is used to Enable and Disable the wireless network
and is set to Enabled by default. If the Radio is Disabled the Access Point will not
broadcast a wireless signal. To Disable the Wireless Radio, click the dropdown
menu, select Disabled, then click Save and then Reboot for the change to take
effect.