User's Manual

luxul.com | 357 South 670 West | Suite 160 | Lindon, UT 84042 | p: 801-822-5450 | f: 801-822-5460
User Guide
21
5.3.2 Wireless Profiles
Wireless Profiles: This page allows configuration of up to 8 Wireless Network
SSID’s:
X
Network Name (SSID): Sets the name of the Wireless Network. If the SSID is not
set on a profile, the name of the network will not be broadcast.
NOTE: Profile 1 is set during Quick Setup
X
Security Mode: Sets the wireless security encryption mode.
X
Encryption: This field only shows while in WPA mode. It is used to select the
encryption method WPA will use (default is TKIP & AES).
X
WEP Key: This field only shows while in WEP mode. Allows the input of a 128 bit
WEP key.
X
WPA Passphrase: Sets the passphrase for wireless network access.
NOTE: If no Network Name (SSID) is specified, the profile is not active.
X
VLAN ID: This field is used to set the Port VLAN Identifier (PVID) associated with
a particular SSID. This feature is used to create multiple wireless networks that
are not accessible to each other (i.e. Home, Guest, Control, etc.). Up to 8 VLAN
ID’s can be set (one for each Profile). A smart/managed switch is required to fully
utilize this feature (see the Luxul Xen™ XMS-1024 or XMS-1008P).
To change or set a VLAN ID, simply enter a number from 1-8, then click Save, and
then Reboot for the change to take effect.