User's Manual

User Guide

Factory Defaults: Use this page to return the XAP-1030 to the original default set-

tings. Please note that using this feature will reset ALL values and custom changes

or settings that have been made to default settings. It is recommended to backup

current settings prior to performing a Factory Default. To restore factory defaults,

select Ye s in the drop down menu and then select Save and then Reboot for the

settings to take effect.

CAUTION: Restoring default conﬁguration will re-set all of your

settings to factory defaults. The XAP-1030 will now have the

default IP address 192.168.0.12. For login, default user name

will be “admin” and default password will be “admin.”

5.4.3 Backup/Restore

Backup/Restore: This page is used to create a backup of the XAP-1030 conﬁgura-

tion and Restore the conﬁguration at a later time if desired. The backup ﬁle can

also be used to set up multiple Luxul Xen Access Points using the same conﬁgura-

tion. Click Backup to save the current conﬁguration settings as a ﬁle. To restore

those settings, click Browse and select the backup ﬁle on your Computer, and then

click Restore.

CAUTION: It can take several minutes to complete the restoration.

To avoid errors during the restoration, do not power off the XAP-1030

or computer being used. At the end of restoration, the XAP-1030

will restart.