User's Manual
User Guide
4
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
1 INTRODUCTION
Congratulations on your purchase of the Luxul Xen™ Commercial Grade Omni
802.11n Wireless Access Point (XAP-1030). The XAP-1030 provides superior
Omnidirectional Wi-Fi coverage in a sturdy and versatile metal enclosure for
deployment in post-construction residential and commercial Wi-Fi installations.
The XAP-1030 is designed to be placed inconspicuously in a centrally located utility
closet or other non-public indoor location. It can be mounted on a wall or simply
placed on a shelf or cabinet. Powered by Luxul’s Xen3D™ Technology, the XAP-1030
enhances data throughput and coverage by as much as 400% over traditional Wi-Fi
gear, providing for whole home or small office coverage with a single access point.
With this high performance wireless access point, computers and wireless devices
that are compatible with 802.11b/g and/or 802.11n can sustain maximum data rates
and improved overall performance at significantly greater distances.
The XAP-1030 features Luxul’s XenSmart™ web based management interface.
XenSmart provides a powerful, yet simple method for setting up and optimizing
the wireless network. The XAP-1030 is also XenConnect™ enabled for optimal per-
formance and installation simplicity when deployed together with Luxul Routers,
Gigabit Switches, and other Luxul products.
XAP-1030 Features:
X
Implements Patented Xen3D™ Technology for Enhanced Throughput and
Coverage
X
Highest FCC Approved Performance (Effective EIRP 36dBm) for Farther Reaching
Signal and Maximum Data Rates
X
18dB of Receive Gain Increases Client Device Network Sensitivity and
Performance
X
Complies with 2.4 GHz IEEE 802.11n Standard. Backward Compatible with IEEE
802.11g/b
X
Supports WMM QoS Functionality to Prioritize Multimedia Traffic
X
Enhanced Multi-Level Security with WPA-PSK (TKIP, AES, TKIP & AES), WPA2-PSK
(AES), WPA-PSK/WPA2-PSK Personal (TKIP & AES) and 128-bit WEP
X
Supports up to 8 SSIDs with Individual Security Settings
X
Multiple SSIDs Support VLAN Tagging (1 VLAN per SSID)
X
Single Cable Installation with PoE (supports both IEEE 802.3af and Legacy)
X
Firmware Upgradeable
X
Easy 3 Step Setup through Web-based XenSmart™ User Interface